401025-en-GB_v2.6 6/17
5
Replacing the Battery
When the left corner of the LCD display shows LO BAT the battery output is below the design limit and
the battery needs to be replaced. However, reliable measurement can still be taken for several hours
before the tester becomes inaccurate or switches off.
1. Open the Battery Cover at the back of the tester and remove the old battery.
2. Replace with a new 9V battery and install the cover securely.
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate
collection sites, the retail store where the batteries were purchased, or wherever
batteries are sold.
Disposal:
Do not dispose of this instrument in household waste. The user is obligated to take end-of-
life devices to a designated collection point for the disposal of electrical and electronic equipment.
Specifications
General Specifications
Display
13mm (0.5") LCD (Liquid Crystal Display)
Measurement types
Lux, Ft-candles (Fc)
Ranges (see range table
below)
Lux: 0 to 50,000 Lux in 3 ranges
Foot-candles: 0-5,000 Fc in 3 ranges
Sensor
Exclusive photo diode & color correction filter, spectrum
designed to meet C. I. E.
Zero Adjust
Manual adjustment
Sampling Time
Approx. 0.4 seconds
Response Time
Fast: 0.25 seconds; Slow: 1 second
Over input indication
Indication of "1__"
Analog Output
0.1 mV/1 digit (maximum output: 200mV)
Operating Temperature
0
O
C to 50
O
C (32
O
F to 122
O
F)
Operating Humidity
Less than 80% RH
Power Supply
9V DC battery
Power Current
Approx. 2 mA DC
Weight
220 g (0.52 lbs.)
Dimensions
Main instrument: 163 x 70 x 30 mm (6.4 x 2.8 x 1.2”)
Sensor Probe: 85 x 55 x 12 mm (3.2 x 2.2 x 0.5”)
Optional Accessories
Vinyl pouch carrying case (Part Number 409996)
