8-line Digital I/O to Ethernet Adapter
4
Setting IP Address
Please consult your Network Administrator to determine the
appropriate IP address for the
Adapter
. The IP address can be set in
any of the following ways:
Automatically from a DHCP Server
Web Browser
Ethernet Managing utility (Em.exe supplied by this product)
This
Adapter
comes with a factory installed static fixed IP address
192.168.1.254
. It is unable to accept a new IP address from a DHCP
Server by factory default (with DCHP client set to Disable). If your
network has a DHCP server and you want it to assign IP address to this
Adapter
, you need to enable this
Adapter
’s DCHP client setting (refer
to the following sections). After that, the
Adapter
will send a DHCP
request to the DHCP server, which will assign a dynamic IP address,
net mask, and gateway to the
Adapter
the first time it is connected
and powered up.
1.
Setting the IP address from a DHCP Server
A DHCP server will automatically assign an IP address (dynamic
address) as well as Subnet Mask and Gateway to this
Adapter
. If
you power up the
Adapter
without a fixed (static) IP address,
the DHCP server will be able to assign an IP address (Note: the
default setting is
Disable
DHCP, if you want to support DCHP,
please Enable it first.).
If you want to set the IP address using another method, the
address becomes static. This was done when you
Disable
the
DHCP setting (default) in the Setup Menu of the
Adapter
.
4. Configuring the Adapter
Wall Mount
DIN RAIL Mount
(Vertical)
DIN RAIL Mount
(Horizontal)