e
XS 5001A Tech Manual
17
The format of the MAC address is a six hexadecimal byte address separated
by colons (e.g. 01:02:03:04:05:06). Continue doing this for each MAC
address you wish to add to the access control list. When you have finished
with MAC address authentication, click the Next button to continue with the
setup
Channel Setup
Following the setup for Repeater capability is the channel setup. The
following figure shows the setup page for selecting the channel in which the
wireless LAN device should operate. The channel selection is a drop down
menu, and only one channel may be selected as shown in the next figure.
Click the Next button to proceed to the next setup page.
In many countries the preferred channels are 1, 6 & 11.
So many consumer devices come from the factory with channel 6 as the
default that it is better to use channels 1 and 11 where possible.
Figure 13
