e
XS 5001A Tech Manual
18
Committing Your Changes
After the setup is completed, the page to permanently commit your changes
is displayed as shown below. To permanently commit your changes, click the
Commit Changes
button.
A reboot will occur so the NODE will boot and initialize using your new
values. You will need to wait a minute or so until after the NODE has
completely rebooted. Once the reboot sequence has completed, you may
access the web configuration again by clicking the
Go to Top
button as shown
in the next figure.
Figure 14
Advanced
The Advanced main menu item provides access to all of the NODE
configuration variables. This tab does not contain the configuration wizard of
the setup tab, so changes to one field will not result in auto-configuration of
the others, i.e. when changing the mode of operation from Repeater to
