Step 5: After the upgrade, click the ‘OK’ key on remote control switch to ‘Plug
and Play’ mode, try the mirror function after the upgrade.
*NOTE: If the MiraScreen Wire+ is abnormal due to mobile phones or tab
software upgrade, please try as above step (1 to 5)
4.3.5 For Android functional operation (only for MiraScreen Wire+). Please
confirm if your android device supports the phone mirror function.
Step 1: Connect Android phones or pads to MiraScreen Wire+
Please refer to picture ① and follow the ‘hardware installation’ steps (1 to 2) in
this manual.
*NOTE: Please do not use iOS lightning cable instead of Android USB cable.
Android USB cable is needed.
A. EZCast software installation for android
Please download’ EZCast’ from Google play store(Android). You may also scan
the QR code on projector screen for downloading.
*NOTE: Supports Android 4.4 and above
*NOTE: Not all Android 4.4 devices support USB Mirror.
B. Android Mirror function: method 1 (USB tethering) (refer to picture ⑨):
Please launch the ‘EZCast’app, and
click the ‘‘ button. After that please
click the ‘Connect’ button, and then enable ‘USB tethering’. Then you may
start mirroring your Android screen.
*NOTE: Supports Android 5.0 and above and the audio stay on your phone.
After mirroring, please do not turn off EZCast app.
