Seite | 9
DE
4
Before using your
device for the first time
Take the appliance out of its
packaging and examine it for
possible transport damage.
Remove all packing material,
such as foils, wadding, cable
holders and cardboard
packaging.
Check that the scope of delivery
is complete.
Do not operate the appliance if
the contents of the package can
be determined to be incomplete
or damaged. Return the
appliance immediately to the
dealer or contact customer
service.
PLEASE NOTE
There could still be dust or
production residue on the device.
Therefore, clean the appliance as
described under "Cleaning".
Contact our customer service in the
event of a defective mains cable.
ATTENTION
This appliance is not intended to be
immersed in water while it is being
cleaned. Please pay attention to the
instructions in the chapter entitled
"Cleaning".
ATTENTION
Avoid d
amage
to
the grill surfaces
that have a non-stick coating.
•
Only use spatulas or
turners
that are made
from wood or
T
eflon.
•
Do not work with
pointed
items
(
e
.
g
.
knives or
fork
s
)
on the grill surface
or leave
scratches on the grill surface.
•
Do not use any
implements
made
from plastic. They can
melt.
•
The upper gri
dd
l
e
is equipped
with on equalizing joint. This
facilitates optimal contact for
the upper griddle with the food
being grilled.
•
The upper
griddle
can be
opened
to an angle of
180°.
This doubles the grill
ing
surface and the equipment is
suitable
for use
as
a
table grill.
•
The
non-stick
grill surfaces
facilitate
grease-free
prepar
at
i
o
n of
your
meals.
•
When using oil, only
oil that
can be heated to a high
temperature, such as
s
unflower oil
, is suitable.
Do
not use
olive oil or butter since
these fats
already develop
smoke
at low temperatures.
Electrical connection
Altogether the equipment can accept
power of 2,000 watts. With this
connected, it is recommended that
you load a separate line with fuse
protection by means of a 16-amp
protective household switch.
Preparing the contact grill for
the first time it's used
1.
Clean the griddles as
described under "C
lean
ing"
.
2.
Snap the c
ontact grill
shut
.
Use
the
grease drip tray
(11) at the
back
of the grill.
3.
Operate the appliance
with
closed
griddles
for
approx. 10
minutes without
food
(see
"O
peration
"
).
Set the
t
emperature regulator to the
MAX
position
.
4.
Pull the
power
supply plug
out
of the
socket.
5.
Allow the device to cool down
completely
.
6.
Wipe the g
rill surfaces with a
damp cloth.
