page | 26
EN
16.4
Compose blender
Improper handling of the blender
or individual instruments can
cause serious injury.
Turn the blender off, and remove
the plug from the socket when
you assemble or disassemble the
blender.
The blender has two safety
devices. It can only be used with
a properly attached mixing bowl
and properly attached safety
covers.
The mixing container 3 is marked
at the lower end with a triangle.
On the drive unit 7 is an open
and a closed lock illustrated.
1. Place the jug on the drive unit
so that the triangle on the jug
points to the open lock.
2. Turn the jug clockwise until
the triangle points to the closed
lock. Hold the drive unit. It will
be heard and felt when the
mixing bowl locks.
3. Place the safety cover 2 on the
jug so that the long edge, looked
from the handle, is placed to the
right of the handle.
4. Turn the safety cover
clockwise until it stops.
The long lead is now under
control.
5. Put the lid insert 1 in the filling
opening, so that the two lugs fit
into the recesses in the filling
opening on the lid and fix the lid
insert by rotating clockwise till it
stops.
You have successfully assembled
the blender jug
