page | 25
EN
15
Usage
The unit is exclusively designed
for mixing. The blender is
intended solely for private use
and not for commercial use.
Use the blender just as described
in this manual. Any other use is
considered improper and can
result in property damage or
even personal injury.
The manufacturer or dealer will
not accept liability for damage
caused by improper or incorrect
use.
16
Initial start-up
16.1
Check blender and delivery
If you open the package
carelessly with a sharp knife or
other pointed object, the blender
can be easily damaged.
Be very careful when opening.
The blender is protected from
damage during transport by the
packaging.
1. Take the blender from the
packaging.
2. Check that the blender or the
installation parts have damage.
If this is the case, do not use the
blender. Contact our specified
service centre.
3. Check whether the delivery is
complete.
16.2
Basic cleaning
1. Remove the packaging
materials, and protective films.
2. Clean all the parts of the
blenderd before the first use as
described in "Cleaning".
16.3
Set up blender
WARNING
•
If you place the blender
improperly, it can cause
damage.
•
Place the blender on a flat, dry
and non-slip work surface. The
work area should be easy to
clean, since you can not
always prevent splatter.
Don’t place the blender
on or
near the edge of the working
surface.
Never place the blender on or
near hot surfaces (eg. hobs,
heating pipes, etc.).
Note that the surface coatings of
furnitures sometimes contain
chemical additives which affect
and soften the suction cups of
the blender. In this way, residues
can arise on the furniture
surfaces. Therefore place a non-
slip surface under the blender.
The drive unit 5 is equipped with
suction cups which provide a
secure grip for the blender.
Set the blender up that it is easy
accessible and near a power
outlet.
