Page 16
3 Specifications
It has been designed for 380 V
10, 50/60 % triphase mains.
±
Deviation ration between phases should not be higher than 5%.
Frequency yield deviation should not be higher than 1%.
±
Electric Supply Requirement:
Expressweld MasterMIG 500W
Physical life determined by Ministry of Industry and Trade is 10 years.
(This is the period for providing spare parts required for the machine to operate.)
MasterMIG 500W is a water cooled and semi-automatic gas metal arc (MIG/MAG)
welding machine with a wire drive unit that can be detachable from the power unit.
Only removing the wire feeder unit is enough to increase the working flexibility and to
be able to perform welding in areas that are more distant from power unit. By this
way there is no need to move or change the location of the heavy power unit. Wire
feeder unit can be moved away from the power unit as the length of extension cord.
It is suitable for the high quality welding of low-carbon structural steel and stainless
steel used in contructions.
It enables welding without splashing problem with carbon dioxide (C02) gas.
It has 30 graded (3x10) welding voltage setting. By this way it is possible to precisely
set the welding parameters.
Wire feed speed can be set.
It has 2/4 trigger option.
It has slow wire feed (soft start) feature that facilitates arc creating.
It has been equipped with thermal protection circuit against overheating load.
It features burnback period setting, gas flow control and wire feeding without welding
and gas flow.
It has two digital indicators indicating welding current and welding voltage values.
It is water cooled. It can be used as air cooled as an option.
It is safe and user friendly.
It protection class is IP21S.
It has been designed according to IEC 60974-1.
EMU Class of machine according to TS EN 55011:2007 is Group 2 Class A.
Guarantee period is 2 (two) years (excluding torch and cables).
Manufacturer company reserves its right to change specifications without notice.