After the power unit is "ON", to make the machine electrically stabilized, the welding operation should
be started after 5-10 seconds hold-on duration.
Check the electromagnetic immunity for equipment operating in or near the work area. The
operator must be
sure that all equipment in the area is compatible. This may require additional
protection measures.
15
Electromagnetic Compatibility - 1
While welding, do not turn on/off the power switch. This situation may cause voltage fluctuations in
mains as well as shorten the economic life of the machine.
Welding machine has been designed according to related norms and rules. In addition, it may cause safety
problem for the devices affected from electromagnetic waves since it may produce interfering electromagnetic
waves for telecommunication devices (telephone, radio, television) and safety equipments. To prevent and
eliminate the effect of these electromagnetic waves (interferences) produced by the machine, please read
below explanations carefully.
Welding machine has been intended to use in industrial fields. In case of using in living spaces, to eliminate
potential effects of electromagnetic waves it is necessary to use specific precautions. User should certainly
install and operate the machine as per the instructions included in the user guide. In case any electromagnetic
interference is detected, user should take necessary precautions for this. If necessary, Kaynak Tekniği Sanayi
ve Ticaret A.Ş. will help to the user in this matter. No modifications should be made on the machine without the
written consent of Kaynak Tekniği Sanayi ve Ticaret A.Ş.
Before the installation of the welding machine, user should check if there is any device in the working area that
may be affected due to electromagnetic waves. Some of these devices are stated below:
1 - Lead wires, control cables and phone cables near the working area and machine,
2 - Radio and/or television receivers and transmitters, telecommunication devices,
3 - Computers or computer controlled devices,
4 - Safety and control equipments for industrial processes,
5 - Personal medical devices such as pacemakers and hearing aids,
Electromagnetic fields may interfere with some pacemakers. Therefore welders having pacemakers
should contact with their physicians before welding process.
6- Calibration and measuring devices.
