ExpertDAQ EX-9060D Operation Manual Download Page 7 | Manualshive

Page: 7 / 51

background image

7

1.5 Module Status for DIO, AIO

Power On Reset

or

Module Watchdog Reset

will let all

output goto

Power On Value

. And the module may accept the

host's command to change the output value.

Host Watchdog Timeout

will let all output goto

Safe Value

.

The module's status(read by command~AA0) will be 04, and the
output command will be ignored.

1.6 Dual Watchdog Operation for DIO, AIO

Dual Watchdog=Module Wa Host Watchdog

The Module Watchdog is a hardware reset circuit to monitor

the module's operating status. While working in harsh or noisy
environment, the module may be down by the external signal. The
circuit may let the module to work continues and never halt.

The Host Watchdog is a software function to monitor the

host's operating status. Its purpose is to prevent the network from
communication problem or host halt. When the timeout interval
expired, the module will turn all outputs to predefined Safe Value.
This can prevent the controlled target from unexpected situation.

The EX9000 module with Dual Watchdog may let the

control system more reliable and stable.

1.7 Reset Status

The Reset Status is set while the module power on or reset by
module watchdog and is cleared while the command read Reset
Status ($AA5) applied. This is useful for user to check the module's
working status. When the Reset Status is set means the module is
reset and the output may be changed to the PowerOn Value. When
the Reset Status is clear means the module is not resetted and the
output is not changed.

«
...
5
6
7
8
9
...
»

Summary of Contents for EX-9060D




















































Reviews:

No comments

Related manuals for EX-9060D

Brand: ABATEC Pages: 8

Brand: ABB Pages: 63

Brand: Vacon Pages: 64

Brand: Magnescale Pages: 132

Brand: EasyIO Pages: 12

Brand: RMG Pages: 6

Brand: D+H Pages: 14

Brand: Fantech Pages: 2

Brand: Sanhua Pages: 3

Brand: QED Pages: 26

Brand: Balboa Pages: 74

Brand: Cadac Pages: 4

Brand: Zaiput Flow Technologies Pages: 10

Brand: TEL Pages: 26

Brand: Vimar Pages: 32

Brand: Viking Pages: 4

GA Figure 220-D

Brand: Vag Pages: 6

CIATControl OPC Server

Brand: CIAT Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands