Expert EX9132C-RS485, Operation Manual

Page: 18 / 25

EX9132C-RS485
Manual
Page 18 EX9132C-RS485 • Manual Version 1.1 • 21.09.2015 www.expertdaq.com
 Socket type
o TCP Server: TCP protocol, passive open, to be connected from the TCP clients.
o TCP Client: TCP protocol, active open, connect to the TCP server specified below.
o UDP Client: UDP protocol, connectionless.
 Remote IP address
Server IP address of the TCP Server or UDP Client (in TCP Server mode leave empty or set to “0.0.0.0”).
 Remote socket port
Port of the TCP Server or UDP Client (in TCP Server mode leave empty or set to 0).
 Interface of serial I/O
Interface of serial I/O is automatically detecting RS422 or RS485 (Auto Detect function). It just depends
on the connected serial devices.
 Baudrate
Baud Rate: 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bps
 Parity, Data bits, Stop bit
Parity: None, Odd, Even, Space, Mark.
Data Bits: 5, 6, 7, 8.
Stop Bit: 1, 2.
 Force off-line time
Force off-line time will close the socket port if no data is transmitting for a certain time (1 - 255 minute).
 Packet Collect Time
The converter will buffer data or the serial port (Rx and Tx) until a specified time (Packet Collect Time: 1
- 999 milliseconds) no data will be transferred or the buffer is full. Then the data will be send in one
packet.