EX9132C-RS485
Manual
www.expertdaq.com
EX9132C-RS485 • Manual Version 1.1 • 21.09.2015
Page 15
Password
This field is the administration password for authentication. Factory default is “empty”. However, it is not
recommended to leave it empty in field operation. If you could not login, it means you have to key in the
password. If you do not know the password you can turn off the power and then use any point tip to push
“Reset” button and hold it to turn on the power at the same time for 5 seconds. The password will be reset to
the factory default.
Converter device uses the same password protection mechanism commonly used in Windows NT or UNIX. If
there are more than “3 consecutive failures” in password check during login, the login function will be disabled
for “15 minutes”. During this 15 minutes period, even if you supply correct password, login will not proceed.
This prevents intruders from finding the password by computer generated program.
3.7
Parameter Setting Page
The Parameter Setting Page
Type the correct password in the “Password” field and click the “Confirm” button in the “Login Setting” page,
then the “Parameter Setting” page will be shown
Note: If you forget the password or can’t login successfully, please contact the manufacturer directly.
