EXPERT GRILL XG17-096-034-18 Owner'S Manual Download Page 3

Model No.

XG17-096-034-18

Page 3

is exercised.

17.  If a longer detachable power-supply cord or extension cord is used:

a.   The marked electrical rating of the cord or extension cord should be at least as great as the 

electrical rating of the appliance; and

b.   The cord should be arranged so that it will not drape over the countertop or tabletop where it can be

pulled on or tripped over.

18.  Outdoor extension cords should be used with outdoor use products and are surface-marked with 

the suffix letter “W” and with a tag stating, “Suitable for use with outdoor appliances.”

19.  The connection to an extension cord should be kept dry and off the ground.

20.  Store product indoors when not in use – out of the reach of children.

21.  Do NOT clean this product with a water spray or the like.

22.  SAVE THESE INSTRUCTIONS.

   This grill is for outdoor use only, and should  NOT  be used in a building, garage or any other 

enclosed area.  

   Do NOT operate or use this appliance within ten feet (3.05 m) of walls, structures or buildings.

   For residential use only. This grill is NOT for commercial use.

   This grill is safety-certified for use in the United States only. Do NOT modify for use in any other 

location. Modification will result in a safety hazard and will void your warranty.

   Apartment dwellers: Check with management to learn the requirements and fire codes for using an 

electric grill in your apartment complex. If allowed, use outside on the ground floor with a ten foot 

(3.05 m) clearance from any structure. Do NOT use on or under balconies.

   This grill is for use with electricity. Do NOT use with any other fuel source.

   Do NOT use 16-gauge or higher extension cords. Damage to household wiring and/or fire could result.

   ELECTRIC SHOCK CAN KILL OR RESULT IN SERIOUS INJURY.  TO PREVENT 

ELECTRICAL SHOCK:

a.   Use only with GFI (Ground Fault Interrupter) protected circuit.

b.   Do NOT use grill when raining.

c.   To prevent grill from being splashed or falling into water, do  NOT  use grill within ten feet (3.05 m) 

of pool, pond or other body of water.

d.   Keep grill and electric controller dry and out of rain when not in use.

e.   Do NOT operate grill with an electric controller that has a damaged cord, plug, or metal probe.  Use 

only the controller provided. The replacement controller should be that specified by the manufacturer.

f.   Never remove the grounding plug. 

g.   Keep electric plug off ground and dry.  

h.   In case of fire, turn controller “OFF,” unplug grill from outlet and allow fire to burn out.  Do NOT use 

water to put out a fire in this or any other electrical appliance.

i.   Do NOT clean grill without first unplugging electric controller and removing heating element.

   Do NOT block holes on any part of the grill.The use of alcohol, prescription or non-prescription drugs 

may impair the consumer’s ability to properly assemble or safely operate the appliance.

   Never use charcoal, lighter fluid, lava rocks, gasoline, kerosene or alcohol with this product.

   Do NOT store or use gasoline or other flammable liquids or vapors within 25 feet (7.62 m) of this 

appliance.

   Do NOT use in an explosive atmosphere. Keep grill area clear and free from combustible materials, 

 

Summary of Contents for XG17-096-034-18




















Reviews: