- 12 -
1 X---------
Side Table Assembly(#17)
4 X --------------------------
(#B)
Installation:
Pre-thread in the 2pcs B screws with 0.2
inch left outside.
Hang up the Part 17 on other 2pcs B
screws and put it down.
Tighten first 2pcs B screws and install
well the side table.
1 X------
Ash Clean-out Cover (#21)
Installation:
There are two ears on the back side
of part 21. You need to turn the two
ears to the same direction as the gap
of the body, and then put it in again.
