85
SunSDR2 DX User Manual
© 2020 Expert Electronics
ExpertSDR2 SOFTWARE DESCRIPTION
List en RX1 in right channel, RX2 in lef t - listen to the RX1 in the right channel and RX2 in
the left channel.
Similar settings were added for VFOs:
List en bot h VFO A/B - default settings, both VFOs have equal volume in both channels.
List en VFO A only - listen to the VFO A in both channels.
List en VFO B only - listen to the VFO B in both channels.
List en VFO A in lef t channel, VFO B in right - listen to the VFO A in the left channel and
VFO B in the right channel.
List en VFO A in right channel, VFO B in lef t - listen to the VFO A in the right channel and
VFO B in the left channel.
Mut e – switch off the sound.
Swit ch RX and mut e f ormer – change the software receiver and mute former one.
TX/Play – turn to TX and play the signal record in air.
Voice recording – enable/disable voice recording.
Volume Up/Down – volume adjustment.
DSP:
ANF – enable/disable auto notch filter.
APF - enable/disable analog pick filter.
BI N – enable/disable binaural mode.
NR – enable/disable noise reduction.
NB1 – enable/disable noise blanker 1.
NB2 – enable/disable noise blanker 2.
SQL – enable/disable squelch.
The following functions may be assigned on the E-Coder panel knobs:
Unused – encoder is unused.
Volume – volume adjustment.
Mic G ain – Mic gain adjustment.
SQL – squelch threshold adjustment.
Filt er Low/High – tuning the frequency of the low/high filter's front.
Filt er Widt h – adjusting the filter width.
Filt er Shif t - shifting the filter's central frequency.
Drive – adjusting the output power.
Summary of Contents for SunSDR2 DX
Page 2: ......
