User manual - FP-T88FVA ONLINE
22
Thorough maintenance of the device is carried out by a service technician, however some
basic operations can be carried out by the user.
To clean the cover of the printer, use a cotton cloth slightly moistened with water or dry.
Do not use products containing alcohol, benzine, thinner or thinne.
Cleaning the thermal head and impression roller.
Dust and pieces of paper may stick to the heating element of the printing head or the
impression roller, which affects negatively the quality of print. In such case, the printing
head and roller should be cleaned in the following way:
1.
Switch off the power supply.
2.
Open receipt cover.
3.
Wipe the heating element of the printing lever and then the impression roller with the
use of a cotton pad soaked with ethyl or isopropyl alcohol. Do not touch the heating
element with anything else than the pad.
NOTE!
Never clean the printer right after printing, as the heating element is
very hot then!
Before cleaning, the printer must be switched off!
Please wait, until the alcohol has evaporated after cleaning.
When cleaning the device yourself, be careful not to damage the printer
seals.
Procedure of removal of the paper jam
1.
Switch off the printer.
2.
Open receipt cover by open cover button.
3.
Remove the paper jam and install the roll again.
Procedure of removal of jam of the cutting edge of the paper cutter
1.
Switch off the printer.
2.
Open the cutter cover.
Heating element
