Exor Marquee MM-0XXX-T Operation Manual Download Page 39 | Manualshive

Page: 39 / 54

background image

Copyright © 2006

Operation Manual

37

Marquee WEB Pages

DEFAULT GATEWAY

This field is used to specify the Default Gateway used by the built-in ethernet port of the
Marquee. If an invalid Default Gateway is entered by the user it will be rejected when the
APPLY button is clicked.

WEB USER ID

This field is used to specify the user ID that is used when accessing the configuration pages
of the MARQUEE.

Note:

If a change is made to this field and then the APPLY button is clicked, the user
will be disconnected from the Marquee. The user must then restart the
browser and log back into the Marquee with the new WEB USER NAME
and/or WEB PASSWORD to continue configuration.

WEB PASSWORD

This field is used to specify the password that is used when accessing the configuration
pages of the MARQUEE.

Note:

If a change is made to this field and then the APPLY button is clicked, the user
will be disconnected from the Marquee. The user must then restart the
browser and log back into the Marquee with the new WEB USER NAME
and/or WEB PASSWORD to continue configuration.

BROADCAST MESSAGE ON NETWORK

This selection allows the user to specify whether or not the Marquee will broadcast the message
that is received across the Ethernet Network. The purpose of this function is to reduce both the
time for application development and network traffic. If this selection is checked, upon
receiving a UDP message the Marquee will rebroadcast the message on the network. Any
Marquee that has been configured to receive the broadcast message will then display the same
message as the broadcaster.

RECIEVE NETWORK BROADCAST MESSAGES

This selection allows the user to specify that the Marquee will be allow receiving of broadcast
messages. If this selection is checked, upon a Marquee broadcasting a message the Marquee will
display the broadcast message.

«
...
37
38
39
40
41
...
»

Summary of Contents for Marquee MM-0XXX-T























































Reviews:

No comments

Related manuals for Marquee MM-0XXX-T

Brand: Safety 1st Pages: 10

Brand: Hauck Pages: 80

BaByBjörn Baby Carrier Origina

Brand: BabyBjorn Pages: 5

Brand: Najell Pages: 80

Brand: Najell Pages: 128

Brand: Edwards & Co Pages: 8

Newborn Insert Cushion

Brand: Edwards & Co Pages: 8

Brand: Edwards & Co Pages: 20

Brand: Edwards & Co Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands