manualshive.com logo in svg

Exor Marquee MM-0XXX-T, Operation Manual

The Exor Marquee MM-0XXX-T is an advanced digital display with a user-friendly interface. To ensure optimal functionality, we provide a comprehensive Operation Manual that can be easily downloaded for free from our website. Simplify installation and maximize the potential of your display with our detailed manual. manualshive.com.

Share
Download
background image

24

BookNameHere

Copyright © 2002

Making The Ethernet Connection

Detailed Ethernet Setup

Verifying Ethernet Communications

The previous section verified the physical connection between the Ethernet port to the PC and the 
Marquee. This section will be used to verify a communication connection exist between the 
Marquee and the PC. 

In order to communicate to the Marquee a communication connection must be established. The 
physical connection indicates that communication can physically occur but does not verify that the 
Ethernet parameters match between the Marquee and the PC. This section is used to verify the 
Ethernet Parameters of both the PC and Marquee.

STEP 1

On the PC, click START followed by RUN.

START

RUN operation

Summary of Contents for Marquee MM-0XXX-T























































Reviews:

No comments

Related manuals for Marquee MM-0XXX-T

Safety 1st Mimoso Manual preview
Mimoso
Brand: Safety 1st Pages: 16
VERTBAUDET 70328-0223 Manual preview
70328-0223
Brand: VERTBAUDET Pages: 6
VERTBAUDET Babybalad Instructions For Use Manual preview
Babybalad
Brand: VERTBAUDET Pages: 14
auna mixx Instructions Manual preview
mixx
Brand: auna Pages: 20
love & carry 4820190020352 Instruction Manual preview
4820190020352
Brand: love & carry Pages: 15
love & carry 4820190020956 Instruction Manual preview
4820190020956
Brand: love & carry Pages: 21

Brands by name

Popular brands

Load more brands