34
Operation Manual
Copyright © 2006
Marquee WEB Pages
DISPLAY CONFIGURATION
This page allows the configuration of how the display will be used along with the default display
mode, color and message pause time. The default color and display method are used when the UDP
message sent to the display does not contain identifies for this operation, refer to UDP
MESSAGING chapter for more details.
Figure 4—
Message And Data Display Configuration Page
DISPLAY LINE USAGE
This selection box allows the user to specify how the display will be used for display of
messages. There are two choices for the display operation either 2 lines of 2” characters or 1 line
of 4” characters.
DEFAULT COLOR
The Marquee is a tri-color display. The display supports 4 color modes, red, green, yellow or
random colors.This selection is used to determine the color of the characters to be displayed if
the UDP message sent to the display does not contain a color modifier command.
DEFAULT DISPLAY METHOD
Display method is how the message is displayed on the Marquee. The Marquee has 24 display
methods.This selection is used as the default method for displaying the message in no method
modifier is supplied in the UDP message.