Copyright © 2006
Operation Manual
47
Marquee WEB Pages
LINE
The LINE field is used to select which line the message will be displayed. Please note selection
of line number 3 and 4 are only available on the 4 line model.
Note:
Not present on 1 line units.
COLOR
The color field allows the user to specify the color of the message to be displayed. The color of
the message can be either a fixed color or based on the color selected for a variable data register.
By choosing a variable color the message can change colors based on the value or state of the
register within the controller. Please note this is the default color and can be overridden by
placing a color change identifier within the text of the message.
FLASH
If this checkbox is checked, the message text will flash. Note that if the color selection is based
on a variable this field is ignored and the message will only flash if the color section for the
variable data has been selected to flash.
Line
Operation
ALL LINES
The message will clear the display then start on the first
line and wrap to consecutive lines.
LINE 1
The message will only clear line #1 and the text of the
message will be displayed on line #1. All other lines of
the display will be unaffected.
LINE 2
The message will only clear line #2 and the text of the
message will be displayed on line #2. All other lines of
the display will be unaffected.
LINE 3
The message will only clear line #3 and the text of the
message will be displayed on line #3. All other lines of
the display will be unaffected.
LINE 4
The message will only clear line #4 and the text of the
message will be displayed on line #4. All other lines of
the display will be unaffected.
Table 2—Line Selection
Table 3—Color Selection.
Selection
Operation
RED
Message color will be Red.
GREEN
Message Color will be Green.
YELLOW
Message color will be Yellow.
VD0-VD9
Message color will be based on the color associated
with the variable data register.