Exor IP-0-T Series, Operation Manual, Page: 45 / 67

46 Operation Manual Copyright © 2006
Marquee WEB Pages
FONT
This field is used to specify the character size of the message. Two choices are available 2” or
4” character height.
Note:
Not present on 1 line units.
Identifier Operation
@T or @t The time of the Marquees real time clock will be
embedded in the message.
@D or @d The date of the Marquees real time clock will be
embedded in the message.
@R or @r Characters following this will be displayed in the color
red.
@G or @g Characters following this will be displayed in the color
green.
@Y or @y Characters following this will be displayed in the color
yellow.
@N or @n Forces the text after this identifier to the next line of the
display. Note that if the message is only displayed on
one line then this indicates the start of the next section
of the message to be displayed on that line.
Not valid
on 1 line units.
@0 - @9 Variable data index selected will be displayed within
the message. The manner the data is displayed is based
on the settings within the VARIABLE DATA
SETTINGS PAGE.
Table 1—Special Identifiers