20
English
Full color “Per Key” LED Keyboard
Click
LED Keyboard
in the
Control Center
to access
the
LED Keyboard
application.
Figure 14
- LED Keyboard Application (Full color “Per
Key” LED Keyboard)
LED Mode - Keyboard
Click
Keyboard
, on the left under
LED Mode
, to set in-
dividual color settings for any keyboard keys you may
wish to highlight.
Simply click to highlight any keys to which you wish to
apply the color, and then click a color from the color
swatch to apply the color. To highlight further keys first
click to deselect any previously selected keys, then repeat
the above procedure. To clear settings click
Restore
.
LED Mode - Keyboard Effect
Click on
Keyboard Effect
(under
LED Mode
) and then
click any of the Effect buttons to view the effects on the
keyboard. You can also adjust the
LED Speed
for the ef-
fects from the buttons on the right. Some effect colors can
set to
Random
or
Custom
.
Table 5
- Keyboard Effects (Full color “Per Key” LED Key-
board)
KB Sleep Timer
Enable and then select the amount of time for which the
system is idle before the keyboard LED enters sleep mode
(i.e. the LED keyboard illumination will turn off to save
power).
KB Brightness
You can adjust the keyboard brightness using the
Bright-
ness
slider.
On boot the key-
board will mo-
mentarily flash.
You can click in
the
Override
Boot
Effect
check box to
disable the key-
board flashing
effect as the
system boots.
Wave
Breath
Scan
Blink
Random
Ripple
Snake
PC 5070 DDDFDN book v2.book Page 20 Thursday, July 30, 2020 4:29 PM
