UK |
15
3112009_CFIR_UK
Drain installation
Install the provided drain if the CFIR is mounted in position B or C as shown above. The drain should be
installed near the outlet of the fan and oriented so it points toward the ground.
To install the drain
•
Use the drain as a template to drill 8 x Ø5 mm holes.
•
Before the 8 x Ø5 holes are drilled, make sure that the curved drainplate follows the
shape of the outside of the housing.
•
Place the gasket between the drain and the fan housing.
•
Use the 8 provided rivets to fasten the drain to the fan housing.
•
Using the fitting as a guide, drill a Ø12 mm hole through the housing to open the drain.
•
Remove burrs inside the housing to ensure the water to run freely through the hole.
D
D
C
DETAIL
1:5
Drain, seen from
below looking up.
Fig 3, side 8
Drain hole
Drain, seen from
below looking up.
Summary of Contents for CFIR
Page 1: ...Your energy Optimized Chimney Fan Inline fan CFIR UK Read and save these instructions...
Page 2: ......
Page 27: ......
