EXO Visual Inc
+1 833 733 7427 V3.1
www.exovisual.com
Note: If you have previously setup the network with multiple ezPosters in the same network. All
ezPosters will show up in the device list
3.1.7, Setup or change network setting.
Click “Modify” under network settings to change network setting.
WIFI Hotspot is the build-in WIFI Access Point in the ezPoster. SSID is the serial
number of the ezPoster. Default password is 123456789 unless it’s changed.
WIFI is your target WIFI router if you intend to connect the ezPoster into your Wifi network.
Local Area Network is your target Local Area Network if you intend to connect with this option.
3.1.8, Set up multiple ezPosters in the same network:
There are 2 ways to allow multiple
devices listed in the device list under one network.
1)
Use one ezPoster’s WIFI Hotspot as a router for all other ezPosters: set up the rest
of your ezPosters’ WIFI network with the first ezPoster’s WIFI Hotspot SSID and
Password. (You don’t need to setup your 1
st
one or the one you are using as the
router for all others).
2)
Set up all the ezPosters to your own WIFI router.
Tip: To change network setting for a big number of ezPosters. Use the “Create Network Setting
USB drive” function under Tool menu. Input the network settings and export to the USB drive,
then plug the USB drive to each ezPoster directly, the network of ezPosters will be set up with the
data stored in the USB drive.
