Safety
decal126-4994
126-4994
1.
Cutting dismemberment hazard-stay away from moving
parts.
2.
Warning-Do Not use any upper frame locations as tie
down points, only use specified lower frame tie down
points; see the Operator’s manual for location.
decal126-5186
126-5186
1.
Read and understand the operator’s manual before
servicing this machine.
4.
Service rear axle shafts-see Operator’s manual.
2.
Grease steering pivots (6x) every 100 hours.
5.
Check tire pressure - 13 psi (4x) every 50 hours.
3.
Check hydraulic oil level (Only use recommended hydro
oil) every 50 hours.
6.
See engine owner’s manual for service.
8