Operation
Note:
When the tank is nearly empty, the agitation may cause foaming in the tank. In this case, push down the
agitation control lever to the “OFF” position. Alternatively, an anti-foaming agent can be used in the tank (if
compatible with the existing chemical).
Note:
Make sure the machine has been calibrated properly before starting spray application
1.
Make sure the spray pump is on.
2.
Drive to the work area to be sprayed.
3.
Shut off the agitation.
4.
Adjust the spray pressure to the appropriate setting.
5.
Turn on the appropriate spray control:
•
To spray using the front sprayer nozzles:
A.
Turn on the narrow or wide controls and begin spraying.
Important:
Do Not use both the narrow and wide controls at the same time.
g027298
Figure 17
Wide spray
1.
Overlap-wide—2 ft (.6 m)
2.
Effective spray area—5 ft (1.5 m)
30