3.
Secure the chute to the deck. Hook the flexible
latch on the chute to the retaining clasp welded
on the mower deck to the rear of the opening.
Fasten the retaining hook around the pivot rod
to secure the chute into position.
g005670
Figure 27
1.
Chute
4.
Retaining hook
2.
Flexible latch
5.
Pivot rod
3.
Retaining clasp
7
Attaching the Discharge
Tube
No Parts Required
Procedure
1.
Slide the curved end of the discharge tube into
the opening in the bagger top.
g010641
Figure 28
1.
Discharge tube, curved
end
4.
Peg
2.
Opening in bagger top
5.
Rubber strap
3.
Discharge tube, flared end
2.
Slide the flared end of the discharge tube over
the end of the chute. Move the rubber retaining
strap on the chute snaps over the peg on the
discharge tube to secure it (see
3.
After the bagger installation, install the wire onto
the spark plug(s).
15
