g018363
Figure 24
1.
Rubber hood latch
3.
Latched position
2.
Hood rod end
7.
Push the hood latch over the end of the hood
rod as shown in
6
Installing the Chute
Parts needed for this procedure:
1
Chute
Procedure
1.
Angle the metal tab at the front of the chute into
the slot in the bracket welded to the mower deck
just in front of the cutoff.
g015203
Figure 25
1.
Chute
4.
Deflector rod
2.
Locking pin
5.
Flexible latch
3.
Rear hook
6.
Notched bracket
2.
Pivot the chute back and toward the deck so
chute is flush with the mower deck.
g015204
Figure 26
Note:
Make sure the retaining hook on the
chute is out of the way so the chute opening
mounts flush to the deck.
14
