Exmark QSS708GEM42200 Page 8 Operator'S Manual Download | Manualshive

Page: 8 / 76

background image

Safety

•

Park machine on level ground. Stop the engine,
wait for all moving parts to stop, engage parking
brake, disconnect spark plug wire(s) and remove
key before performing any service, repairs,
maintenance or adjustments.

•

Keep hands, feet, hair, and loose clothing away
from attachment discharge area, underside of
mower and any moving parts while engine is
running.

•

Do Not touch equipment or attachment parts
which may be hot from operation. Allow to cool
before attempting to maintain, adjust or service.

•

Battery acid is poisonous and can cause burns.
Avoid contact with skin, eyes, and clothing.
Protect your face, eyes, and clothing when
working with a battery.

•

Battery gases can explode. Keep cigarettes, sparks
and flames away from battery.

•

Use only Exmark approved attachments.
Warranty may be voided if used with unapproved
attachments.

•

If loading the machine onto a trailer or truck, use
a single, full-width ramp only. The ramp angle
should not exceed 15 degrees.

Note:

The left and right sides of the machine are

determined while sitting in the seat in the normal
operating position

8

«
...
6
7
8
9
10
...
»

Summary of Contents for QSS708GEM42200













































































Reviews:

No comments

Related manuals for QSS708GEM42200

Brand: Yard Machines Pages: 20

Brand: H&S Pages: 96

Brand: Snapper Pages: 2

Brand: MTD Pages: 16

Brand: Snapper Pages: 20

Brand: MTD Pages: 20

Brand: Sears Pages: 32

Brand: Bad Boy Pages: 36

Brand: Simplicity Pages: 56

AutoDrive 60-1827-4

Brand: Yard Works Pages: 53

ROPS Reelmaster 5210

Brand: Toro Pages: 9

Brand: Toyama Pages: 60

Brand: Simplicity Pages: 80

Brand: Honda Pages: 29

Brand: Honda Pages: 4

Brand: Honda Pages: 81

Brand: Honda Pages: 24

Brand: Honda Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands