Exmark QSS708GEM42200 Operator'S Manual Download Page 35 | Manualshive

Page: 35 / 76

background image

Maintenance

Maintenance

Note:

Determine the left and right sides of the machine from the normal operating position.

WARNING

While maintenance or adjustments are being
made, someone could start the engine.
Accidental starting of the engine could seriously
injure you or other bystanders.

Remove the key from the ignition switch, engage
parking brake, and pull the wire(s) off the spark
plug(s) before you do any maintenance. Also
push the wire(s) aside so it does not accidentally
contact the spark plug(s).

WARNING

The engine can become very hot. Touching a hot
engine can cause severe burns.

Allow the engine to cool completely before
service or making repairs around the engine area.

WARNING

Removal or modification of original equipment,
parts and/or accessories may alter the warranty,
controllability, and safety of the machine.
Unauthorized modifications to the original
equipment or failure to use original Exmark
parts could lead to serious injury or death.
Unauthorized changes to the machine, engine,
fuel or venting system, may violate applicable
safety standards such as: ANSI, OSHA and
NFPA and/or government regulations such as
EPA and CARB.

CAUTION

Raising the mower deck for service or
maintenance relying solely on mechanical
or hydraulic jacks could be dangerous. The
mechanical or hydraulic jacks may not be enough
support or may malfunction allowing the unit to
fall, which could cause injury.

Do Not rely solely on mechanical or hydraulic
jacks for support. Use adequate jack stands or
equivalent support.

35

«
...
33
34
35
36
37
...
»

Summary of Contents for QSS708GEM42200













































































Reviews:

No comments

Related manuals for QSS708GEM42200

Brand: Ransomes Pages: 54

Brand: Parkside Pages: 60

Brand: Ransomes Pages: 92

Brand: Parklander Pages: 42

Brand: Baroness Pages: 66

Brand: Gude Pages: 108

Brand: Texas Pages: 60

Brand: MTD Pages: 29

Brand: Simplicity Pages: 48

Brand: Toro Pages: 52

White Outdoor GT2550

Brand: MTD Pages: 56

Brand: McCulloch Pages: 44

Brand: Scag Power Equipment Pages: 41

Brand: Craftsman Pages: 20

Brand: Craftsman Pages: 26

Brand: Craftsman Pages: 44

Brand: Craftsman Pages: 26

Brand: Craftsman Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands