Maintenance
Figure 32
Note:
To prevent extensive engine wear or
damage, always maintain the proper oil level in the
crankcase. Never operate the engine with the oil
level below the “ADD” mark or over the “FULL”
mark on the dipstick.
Checking the Engine Oil–Kohler
Engine
Service Interval: Before each use or daily
Important:
Do not overfill the crankcase with oil
and run the engine; engine damage may result.
1. Park the machine on a level surface, disengage
the blade control switch, stop the engine, engage
parking brake, and remove the key.
2. Make sure the engine is stopped, level, and is cool
so the oil has had time to drain into the sump.
3. To keep dirt, grass clippings, etc., out of
the engine, clean the area around the oil fill
cap/dipstick before removing it.
4. Check the engine oil level.
B
A
C
D
E
g027515
F
G
H
Figure 33
5. If the level is low, wipe off the area around the
oil fill cap, remove cap/dipstick and add oil to
the “F” (FULL) mark on the dipstick. Exmark
4-Cycle Premium Engine Oil is recommended.
Always check the level with the dipstick before
adding more oil.
Do Not
overfill.
•
Crankcase Capacity: 1.9L (64 oz) when the
filter is changed.
•
Recommended Oil Type: Exmark 4-Cycle
Premium Engine Oil
41
Summary of Contents for QSS708GEM42200
