Troubleshooting
Troubleshooting
Important:
It is essential that all operator safety mechanisms be connected and in proper operating
condition prior to mower use.
The following table lists some of the common causes of trouble. If assistance is needed, contact your
Exmark Service Dealer.
Note:
When disconnecting electrical connectors Do Not pull on the wires to separate the connectors.
Problem
Possible Cause
Corrective Action
Gate does not lock when closed.
1. Cable tension is too tight.
1. Adjust the cable nuts.
1. Cable is not tensioned properly.
1. Adjust the cable nuts.
Gate does not open.
2. Cable is disconnected at one or both ends.
2. Reconnect cable.
Pedal is too loose or tight.
1. Pivot bolt and nut not adjusted properly.
1. Adjust the bolt and nut for proper pedal
feel.
13