g030227
Figure 34
1.
Engine settings
2.
Adjust engine speeds
Pressing the up arrow will increase the engine speed
while pressing the down arrow will decrease the
engine speed. Pressing the enter button confirms the
speed and automatically moves the user to the next
screen/engine speed set point.
g030228
Figure 35
1.
Engine settings
4.
Up arrow–Increase
2.
Set low mow speed
5.
Enter/Return
3.
Engine speed set point
(e.g. 3600)
6.
Down arrow–Decrease
The system will not allow the following to occur:
•
The efficient speed can not be set higher than the
max speed.
•
The low speed can not be set higher than the
efficient speed.
Note:
The user can set the max=efficient mow speed
to use the efficient mode while mowing.
5.3.6 Calibrate Engine Speed Command
Output
The screens allows the calibration of the actual engine
speed to match the commanded engine speed. The
enter button will be blacked out if the “safe to start”
mode (blades disengaged, park brake engaged,
motion controls in neutral lock) is not met. Once the
“safe to start” is met, press the enter button to start
the calibration process.
g030234
Figure 36
1.
Calibrate engine settings
2.
Start calibration
An animated hourglass will appear indicating the
calibration is in process.
g030235
Figure 37
1.
Calibrate engine speed
3.
Processing
2.
Calibrating
Once the calibration is complete, the user can toggle
back to the primary calibrate engine speed screen.
g030237
Figure 38
1.
Calibration engine speed
3.
Toggle between screens
2.
Calibration complete
5.3.7 Reset Options Back To The Factory
Default Settings
The factory defaults screen allows the user to reset
system settings back to the factory default settings.
Pressing the enter button brings up confirmation
screen – Y (yes) to reset or N (no) to cancel.
Note:
Resetting the system will return the engine
speed settings and alarm settings back to the factory
default settings.
15
