Exmark Laser Z XPLZ27DD724 Operator'S Manual Download | Manualshive

Page: 2 / 60

background image

i

WARNING

POTENTIAL HAZARD

♦

This product is a piece of power equipment.

WHAT CAN HAPPEN

♦

Failure to follow safe operating practices can result in serious

operator injury or even death.

HOW TO AVOID THE HAZARD

♦

Keep all shields, guards and safety devices (especially the grass

discharge system) in place and in proper working condition.

♦

Stop engine and remove spark plug wire(s) or remove key and

wait for all moving parts to stop before adjusting, servicing, or
performing maintenance.

♦

If mower deck becomes clogged, stop engine and remove spark

plug wire(s) or remove key and wait for all moving parts to stop
before cleaning blockage.

♦

Keep hands, feet and clothing away from power driven parts.

♦

Keep others off mower.

WARNING

POTENTIAL HAZARD

♦

Gasoline is harmful or fatal if swallowed. Long-term exposure to

vapors has caused cancer in laboratory animals.

WHAT CAN HAPPEN

♦

Failure to use caution may cause serious injury or illness.

HOW TO AVOID THE HAZARD

♦

Avoid prolonged breathing of vapors.

♦

Keep face away from nozzle and gas tank/container opening.

♦

Keep away from eyes and skin.

♦

Never siphon by mouth.

IMPORTANT

When the mower is used or operated on any California forest, brush or grass covered land, a working
spark arrester must be attached to the muffler. If not, the operator is violating state law, Section 4442
Public Resource Code. To acquire a spark arrester for your unit, see your Engine Service Dealer.

Exmark reserves the right to make changes or add improvements to its products at any time
without incurring any obligation to make such changes to products manufactured previously.
Exmark, or its distributors and dealers, accept no responsibility for variations which may be
evident in the actual specifications of its products and the statements and descriptions
contained in this publication.

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

«
1
2
3
4
...
»

Summary of Contents for Laser Z XPLZ27DD724





























































Reviews:

No comments

Related manuals for Laser Z XPLZ27DD724

Brand: MTD Pages: 4

Brand: Sears Pages: 56

Brand: Gardenline Pages: 36

Brand: Simplicity Pages: 32

Agco Allis 1692173

Brand: Simplicity Pages: 60

Brand: BOXER AGRI Pages: 15

Brand: Gtech Pages: 68

Brand: Yazoo Pages: 8

Brand: Matrix Pages: 68

Brand: Qualcast Pages: 22

Brand: Lawn-Boy Pages: 28

Brand: Fa-Ga Pages: 45

Brand: Hitachi Koki Pages: 96

Brand: LawnMaster Pages: 29

CRAFTSMAN 944.604931

Brand: Sears Pages: 56

Craftsman 917.254920

Brand: Sears Pages: 29

Brand: Sears Pages: 28

Brand: Sears Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands