Safety
Safety and Instructional Decals
•
Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
•
Replace all worn, damaged, or missing safety
signs.
•
When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
•
If an attachment or accessory has been installed,
make sure current safety signs are visible.
•
New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
•
Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
•
Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
decal135-0990
135-0990
1.
Spread pattern-heavy
2.
Spread pattern-light
decalimpellset
Impeller Setting Display
1.
Impeller switch-Off
3.
Impeller switch-On
2.
Impeller switch-Slow
4.
Impeller switch-Fast
decal126-4994
126-4994
1.
Cutting/dismemberment hazard—keep away from moving
parts.
2.
Warning—do not use the upper front locations as tie down
points, only use the specified tie-down points; see the
Operator’s Manual
for location.
7
