Exit Contour Round, User Manual

Page: 12 / 60

12
8
Insert one assembled Cable wire(10)
e on the top of the enclosure
e sure the center of the enclosure
4
6
6
A
B
Insert one assembled top Cable wire
Notice: Two adults are required
op Ca-
e on the top of the
ttach two ends of the entire Cable
Notice: Put the net on the inside
Place the Cable Wire with enclosure
-
e sure the center of the enclosure
ance and center of the two legs
8
4
6
6
A
B
8 ft 10 ft , 12ft, 14 ft
Step 8
A
Insert one assembled Cable (6) wire
into sleeve on the top of the enclo-
sure net (4) as shown A.
Notice: Two adults are required
when assemble.
Insert the second assembled Cable
wire (6) into sleeve on the top of the
enclosure net by the same manner.
B
Attach two ends of the entire Cable
wire together as shown B.
Notice: Put the net on the inside
of the poles on the frame pad.
Now go stand on the jumpmat.
Place the Cable Wire with enclsoure
to the plastic cap. Make sure the ca-
ble wire fit into the slot properly.
Repeat for all the cable wire and
plastic cap.
Make sure the center of the enclosure
doos and center of the two legs are
aligned.