Exit Contour Round, User Manual

Page: 7 / 60

7
4.0 SAFETY NET ASSEMBLY
STEP BY STEP CONSTRUCTION
Please read the assembly instructions before beginning to assemble the
product.
Please refer to the table below for parts description and numbering.
Make sure you have all the parts listed. If you are missing any parts, please contact
place of purchase.
Please use gloves to protect your hands from pinch points during assembly. When
you are ready to start, make sure that you have plenty of space and a clean dry area
for assembly.
3.0 General Information
• It is not necessary to break-down the trampoline during winter.
• Self-securing nuts and screws are suitable only for one time setting-up, and
must be replaced after breakdown of the trampoline and/or safetynet.
• The safetynet has a minimum durability of 5 years after purchasing.
• It is recommended to place the trampolines on a flat and level surface with at
least 2 m distance to other superstructures, or barriers, e.g. fence, garage,
house, tree branches, washing lines, or electrical cables.
• The trampoline shall not be placed over hard surfaces like asphalt, concrete etc.
• Exchange defective parts according to the supplier’s recommendation.
• Changes to the trampoline (e.g. addition of an accessory) must be done accord-
ing to the supplier’s instruction.