4
5
4
5
INTRODUCTION
To get the best out of your new appliance,
please read this user guide carefully before
using it for the first time. Take particular
note of the safety precautions. We also
recommend that you keep the instructions
for future reference, so that you can remind
yourself of the functions of your appliance.
SAFETY MEASURES
Normal use of the appliance
• Incorrect use of this appliance may
cause personal injury and damage to
the appliance.
• Use for its intended purpose only. The
manufacturer is not responsible for
any injury or damage resulting from
incorrect use or handling (see also
Guarantee Terms).
• For connection to 20 V, 50 Hz only.
• The kettle may only be used with the
base station supplied.
• For domestic use only. Not for outdoor
or commercial use.
• Remove the plug from the socket once
you have finished using the appliance.
• Please note that the appliance will
remain hot for a while after you switch
it off. Always allow it to cool completely
before you put it away or clean it.
• Do not submerge in water or any other
liquid.
• Do not switch the appliance on unless
there is water in it.
• The water level in the kettle must not
be below the marks “MIN” or above
“MAX” on the water level gauge.
• Keep the appliance under constant
supervision while in use. Keep an eye
on children when the appliance is in
use.
• Avoid touching the outside of the kettle
when in use, as it becomes hot. Touch
the handle and buttons only. Be careful
of hot steam when opening the lid.
• Never touch the appliance or base
station if your hands are wet or damp.
Positioning the appliance
• Always place on a firm, level and heat
resistant surface at a safe distance
from heat sources such as ovens, hot
plates or the like.
• Always place the appliance at the
back of a kitchen counter and at a safe
distance from flammable objects such
as curtains, tablecloths or similar.
• Do not cover.
Cord, plug and mains socket
• Do not allow the cord to hang over
the edge of a table/counter, and keep
it away from hot objects and the hot
surfaces of the appliance.
• Check that it is not possible to pull
or trip over the cord or any extension
cord.
• Remove the plug from the socket when
cleaning, or when the appliance is not
in use. Avoid pulling the cord when
removing the plug from the socket.
Instead, hold the plug.
• Ensure that the cord is wound correctly
on the holder at the bottom of the base
station so that the base is standing
firmly and does not rest on the cord.
• Check regularly that neither the cord
nor plug is damaged and do not use if
there is any damage, or if it has been
dropped on the floor, dropped in water
or damaged in any other way.
• If the appliance or plug is damaged, it
must be inspected and if necessary,
repaired by an authorised repair
engineer, otherwise there is a risk of
electric shock. Never try to repair the
appliance yourself. Please contact
the store where you bought the
appliance for repairs under guarantee.
Unauthorised repairs or modifications
will invalidate the guarantee.
KEY TO MAIN COMPONENTS OF THE
APPLIANCE
. Power cord with plug
2. Holder for storing cord
. Base
4. Connector
5. Water level gauge
6. Handle
7. Release button for lid
8. Lid
9. Button for closing lid
10. Limescale filter
. Spout
2. On/Off button
UK
