4
5
En
gl
is
h
Operating instructions
On/off button
On
−
to use the earphones with a new external device
Follow the instructions in the
Bluetooth connection
section below.
On
−
to use the earphones with a previously paired
external device
Hold in [ ] for approximately 3 seconds. Release [ ] when
the LED indicator flashes blue.
Off
Hold in [ ] for 4 seconds. Release [ ] when the LED indicator
shines red.
Bluetooth connection
1. Hold in [ ] for approximately 5 seconds. Release [ ] when
the LED indicator flashes red/blue.
2. Activate Bluetooth mode on the device that you want to
connect the earphones to.
3. The earphones will appear on your device as
Varialite
.
Select it to pair with the device.
4. When contact has been established the LED indicator will indicate
a successful connection by flashing blue every 8 seconds.
5. Start playback on your external Bluetooth device. Set the initial
volume level on the external device and fine-tune the level
using the volume controls on the earphones.
6. Playback can be controlled from your external Bluetooth
device and the buttons on the earphones in accordance with
the
Buttons and functions
section above.
Note:
• The earphones will automatically connect to the last connected
device if they are on and Bluetooth is activated on the last
connected device.
• If you are prompted to enter a PIN code on your device, you
should enter
0000
(four zeroes). Certain devices may also
require you to approve the connection.
Summary of Contents for Varialite FW-1845
Page 2: ...2 ...
Page 33: ...33 33 ...
