![background image](http://html1.mh-extra.com/html/exibel/dab-x30/dab-x30_manual_2450292009.webp)
9
Eng
lis
h
4. When the display shows your desired mode, press the volume control to activate
the alarm. The alarm icon will appear on the display.
5. When the alarm time arrives, the alarm icon will flash to indicate that the alarm is
triggered. Stop the alarm by pressing [ ].
The alarm will automatically repeat every day as long as the alarm icon is displayed.
To cancel the alarm, go to the Alarm Menu and select
Alarm # off
.
Snooze
When the alarm sounds press [ ALARM/SNOOZE ] to temporarily switch the alarm off
for 5 minutes. The display will show “Zz” to indicate that the snooze is on. The snooze
function can be repeated for up to one hour.
Setting the SLEEP time
The sleep function allows you to programme the radio to switch itself off after a period
of 90, 60, 30 or 10 minutes.
There are 7 settings: OFF, 90 MIN, 80 MIN, 70 MIN, 60 MIN, 30 MIN and 10 MIN.
Press the [ SLEEP ] button to select a time option; the selection will be confirmed
automatically after 3 seconds. When the sleep function is activated the word “SLEEP”
will appear on the display.
AUX IN
There is a 3.5 mm stereo aux input socket located on the back of the radio.
1. To select the AUX IN, press [ MODE ] until you see “Switch to AUX” displayed.
2. This will enable you to play audio from an external device through the radio.
3. Adjust the volume using the volume control.
USB
There is a USB port located on the back of the radio which can be used for charging
external audio sources, etc.
Activating the alarm
1. Press [ ALARM/SNOOZE ] to enter the Alarm Menu and select
Alarm 1
or
Alarm 2
.
2. Select
Alarm Source
by turning and pressing the [ VOLUME/SCROLL/OK
►
ll ] control.
3. Turn the [ VOLUME/SCROLL/OK
►
ll ] control again to browse through the alarm
mode menu in the following order:
Summary of Contents for DAB X30
Page 2: ...2...