3000113-2010-12-13
4 / 52
GB
Main components
: The RSV has the following main components
RSV 9-12-14-16
RSV 160-200-250-315-400-450
m
m
m
m
a
Top section
g
Safety mesh
b
Bottom section
h
Handle
c
Motor
i
Armoured cable and connecting cable
d1
Vane
j
Mineral wool mat
d2
Centrifugal impeller
k
Safety wire
e1
Inlet for axial vane
l
Location bracket, bolt and nuts
e2
Inlet for centrifugal impeller
m
Screws to fasten top and bottom section
(Alternatively use supplied wing screw,
where conditions allow)
f
Hinge
1.2 Installation instructions
The fan is designed to be fitted directly on top of brick or steel chimneys, as long as these
are stable and level.
Before fitting onto a chimney
If....
then..
the fan is to be mounted onto a
brick chimney
the chimney must have location brackets - see below
the fan is to be mounted onto a
steel chimney
a flange is required (supplied as an extra) - see below
the fan is a RSV 315, 400 or 450
the impeller is secured with a safety bracket for transpor-
tation.
Remove the transportation safety bracket located near
the impeller and check that the impeller can turn freely.
