Copper Auto Tests
228
MAX-610
User Auto Test
User Auto Test
User Auto Test
runs a range of different user-defined tests that compare
measured results against stored threshold values to provide pass or fail
status and results. Test parameters and thresholds are inherited from
individual tests.
To access User Auto Test:
1.
From the
Copper Main
menu, use the up/down, left/right arrow keys
to highlight
Auto Test
and press
.
2.
Highlight
User Auto Test
and press
to start the test.
Summary
The
Summary
page displays the overall pass/fail
status of all tests selected for auto testing.
Current Group
is the current test group name, for
example
Auto Test
.
Current Test
displays the test being measured.
Here you can switch to another test from the given
list. However, this action will terminate the
ongoing measurement test.
When FED is
Enabled
, the FED icon and numeric
state are displayed beside the
Current Test
.
Test Selection
button opens a new page that allows you to select the
tests to include in the
User Auto Test
.
Result
displays each test selected and its status.
Test Status
displays the current state of measurement or an error
message.
