EXFO IQS-5320, User Manual, Page: 94 / 177

Generating Reports
Multi-Wavelength Meter
85
Entering Report Information
3. Select the Fiber tab to enter information about the fiber tested. In the
appropriate fields, enter the following information:
➤
Location A/B : location of the fiber start and end points.
➤
Cable ID
: cable identification.
➤
Fiber ID : fiber identification.
➤
Cable Mfg
.: name of the fiber manufacturer.
➤
Type : fiber type.
Note:
The Location A/B and Cable Mfg. entries can have a maximum of
25 characters. All other entries in the Job tab can have a maximum of
14 characters.
The current file name is also displayed automatically on the Fiber tab
and cannot be edited. This field is disabled (grayed out).
4. Select the Job tab to enter information about the job performed. In the
appropriate fields, enter the following information:
➤
Job ID : job identification, if any.
➤
Contractor
: contractor name.
➤
Customer : customer name.
➤
Maint. Reason
: maintenance details.
➤
Operator A or B : identification of operators.
Note:
The Job ID entry can have a maximum of 9 characters. All other entries in
the Job tab can have a maximum of 24 characters.
The test date and time as well as the model and serial numbers of the
MWM module used for the test are also displayed automatically in the
Job
tab and cannot be edited. These fields are disabled (grayed out).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com