manualshive.com logo in svg

EXFO IQ-2600B, Instruction Manual, Page: 70 / 97

Share
Download
EXFO IQ-2600B Instruction Manual Download Page 70

Tunable Laser Source

63

5

Maintenance

There are no user-serviceable components in the IQ-2600B 
notwithstanding the procedure described in this section. The module has 
been designed to require a minimum of maintenance and provide 
accurate operation for many years.

Transportation and Storage

Maintain a temperature range within specifications when transporting or 
storing the unit. Transportation damage can occur from improper handling. 
The following steps are recommended to minimize the possibility of 
damage:

➤

Pack the unit in the original packing material when shipping.

➤

Store unit at room temperature in a clean and dry area. Avoid high 
humidity or large temperature fluctuations.

➤

Keep the unit out of direct sunlight.

➤

Avoid unnecessary shock and vibration.

General Maintenance

 To help ensure long, trouble-free operation,

➤

Keep the IQ module free of dust.

➤

Be careful not to spill liquids into the unit. If the unit does get wet, turn 
the power off immediately and let the unit dry completely before 
turning it on again.

➤

Clean the IQ module casing with a cloth slightly dampened with water.

Cleaning the Optical Ports

To ensure maximum power output, the fiber end must be kept clean at all 
times. However, the source port should be cleaned occasionally to ensure 
minimum insertion loss. 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for IQ-2600B


































































































Reviews:

No comments