manualshive.com logo in svg

EXFO IQ-2600B, Instruction Manual, Page: 45 / 97

Share
Download
EXFO IQ-2600B Instruction Manual Download Page 45

Remote Control

38

IQ-2600B

Specific Commands

SOURce:POWer:LIMit:HIGH?

Description

This query returns the maximum source output power.

Syntax

SOUR:POW:LIM:HIGH?

Response

The maximum source output power (in dBm) in the “±99.99” 

format.

See also

SOUR:POW:LIM:LOW?, and SOUR:POW:LIM:STEP?

SOURce:POWer:LIMit:LOW?

Description

This query returns the minimum source output power (in dBm) 

that can be set with the SOUR:POW command.

Syntax

SOUR:POW:LIM:LOW?

Response

The minimum source output power (in dBm) in the “±99.99” 

format.

See also

SOUR:POW:LIM:HIGH?, and SOUR:POW:LIM:STEP?

SOURce:POWer:LIMit:STEP?

Description

This query returns the minimum output power step (in dBm) 

that can be used when changing the source output power with 

the SOUR:POW command.

Syntax

SOUR:POW:LIM:STEP?

Response

The minimum output power step (in dBm) in the “±99.99” 

format.

See also

SOUR:POW:LIM:HIGH?, and SOUR:POW:LIM:LOW?

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for IQ-2600B


































































































Reviews:

No comments