EXFO FIP-400B User Manual Download

Page: 9 / 111

Introducing the FIP-400B Fiber Inspection Probe and ConnectorMax2

Fiber Inspection Probe

Probe Tips

Probe Tips

The FIP-400B comes with two interchangeable tips included in two
different packages (UPC or APC). Additional models are also available.



UPC package:



FIPT-400-FC-SC: FC-SC Bulkhead tip



FIPT-400-U25M: Universal patchcord tip (2.5 mm ferrule)



APC package:



FIPT-400-SC-APC: SC APC tip for bulkhead adapter



FIPT-400-U25MA: Universal patchcord tip for 2.5 mm ferrules

Other tip models are available for various bulkhead adapters and
patchcord connectors. For more information about tips and their use, see
the

Fiber Inspection Probe Tip Compatibility Chart

on page 95, or visit the

EXFO Web site.

Summary of Contents for FIP-400B
















































































































Search results

Summary of Contents for FIP-400B

Reviews:

Related manuals for FIP-400B

Brands by name

Popular brands

EXFO FIP-400B, User Manual

Search results

Summary of Contents for FIP-400B

Reviews:

Related manuals for FIP-400B

Brands by name

Popular brands