EXFO FIP-400B User Manual Download

Page: 87 / 111

Fiber Inspection Probe

Maintenance

General Maintenance

To help ensure long, trouble-free operation:



Keep the unit free of dust.



Clean the unit casing and front panel with a cloth slightly dampened
with water.



Store unit at room temperature in a clean and dry area. Keep the unit
out of direct sunlight.



Avoid high humidity or significant temperature fluctuations.



Avoid unnecessary shocks and vibrations.



If any liquids are spilled on or into the unit, turn off the power
immediately and let the unit dry completely.

Recycling and Disposal

(Applies to European Union Only)

For complete recycling/disposal information as per European Directive
WEEE 2012/19/UE, visit the EXFO Web site at

www.exfo.com/recycle

ARNING

The use of controls, adjustments and procedures other than those
specified herein may result in exposure to hazardous situations or
impair the protection provided by this unit.

Summary of Contents for FIP-400B
















































































































Search results

Summary of Contents for FIP-400B

Reviews:

Related manuals for FIP-400B

Brands by name

Popular brands

EXFO FIP-400B, User Manual

Search results

Summary of Contents for FIP-400B

Reviews:

Related manuals for FIP-400B

Brands by name

Popular brands