EXFO FIP-400, User Manual

Page: 33 / 78

Setting up Your Fiber Inspection Probe and ConnectorMax
Fiber Inspection Probe
27
Managing and Selecting Test Configurations (Optional)
3. In the General tab, modify the criteria as needed.

Configuration name:
the application suggests a name for the
configuration. You can change it as needed (maximum 100
characters), but if you select a name that already exists, a suffix will
automatically be added so as not to overwrite files.

Connector type:
select which type of connector you are using for
your inspection.

Fiber type:
Select whether you are inspecting singlemode or
multimode fibers.

Polishing type:
Select the type of polishing for the fibers between
APC, PC or UPC.

Analysis mode
: Select the type of analysis between Outside plant
(selected by default) and Manufacturing. The manufacturing mode
is more sensitive for scratches and defects detection.

Cladding diameter: This value is set at 125 μ m and cannot be
modified.