EXFO FIP-400, User Manual

Page: 20 / 78

Setting up Your Fiber Inspection Probe and ConnectorMax
14
FIP-400
Adjusting Brightness and Contrast
Adjusting Brightness and Contrast
Once the probe is connected to a fiber, you can adjust brightness and
contrast in order to better view the fiber under inspection.
To adjust brightness or contrast:
1.
From the main window, click
Video Control
.
2.
Use the contrast and brightness sliders at the bottom of the viewing
area to set the levels to suit your needs.
3.
Click Video Control again to exit the menu. The menu will close by
itself after 10 seconds of inactivity.